IceCap 4-Stage Reverse Osmosis Water Filtration Systems
The IceCap RO/DI water filtration system is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source and can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, as well as reef aquariums.
4 Stage Value RO/DI Features:
- RO/DI single-membrane system with durable clear filter canisters
- Glycerin-filled pressure gauge
- Single Dow Filmtec membrane (The best there is.)
- 5 µ IceCap polypropylene sediment pre-filter
- 5 µ IceCap carbon block filter
- Refillable DI cartridge with high-capacity color changing resin
- All-in-one universal filter wrench to tighten and loosen canisters
- Installation connection fittings, polyethylene tubing & accessories
- Does not require a power source to run
- 1yr Warranty (Warranty does not include filters)
150gpd & 200gpd Systems General Details:
- Optimal Feed Water Pressure: 65-80 psi
- Maximum Handling Water Pressure: 150 psi
- Optimal Water Temperature: 25° C (77° F)
- Maximum Water Temperature: 39° C (90° F)
- pH Range: 2-11
- Typical Rejection Rate: ~1.5:1
- Uses standard 10in canisters, cartridges, and ¼in Push-connect fittings
Dimensions (LxWxH): 16in x 6.5in x 18.5in
Limited Warranty: 1 year (does NOT include filters)
IceCap RODI System Comparison Chart
| 4-STAGE RO/DI MODEL: | 75GPD System Item#: IC-RI75 |
100GPD System Item#: IC-RI100 |
150GPD System Item#: IC-RI150 |
200GPD System Item#: IC-RI200 |
| Gallons Per Day | 75* | 100* | 150* | 200* |
| Dimensions (LxWxH) | 16 x 6.5 x 15.5in | 16 x 6.5 x 15.5in | 16 x 6.5 x 18in | 16 x 6.5 x 18in |
| Sediment Filter – Stage 1 | IceCap 5 Micron Sediment Filter | IceCap 5 Micron Sediment Filter | IceCap 5 Micron Sediment Filter | IceCap 5 Micron Sediment Filter |
| Carbon Block -Stage 2 | IceCap 5 Micron Carbon Block | IceCap 5 Micron Carbon Block | IceCap 5 Micron Carbon Block | IceCap 5 Micron Carbon Block |
| Membrane – Stage 3 | 75gpd DOW Filmtec Membrane^ | 100gpd DOW Filmtec Membrane^^ | 75gpd DOW Filmtec Membrane^ | 100gpd DOW Filmtec Membrane^^ |
| Deionization Resin – Stage 4 | Mixed Bed DI Resin with Refillable Cartridge |
Mixed Bed DI Resin with Refillable Cartridge |
Mixed Bed DI Resin with Refillable Cartridge |
Mixed Bed DI Resin with Refillable Cartridge |
| Waste to Product Water Ratio | 3:1 | 3:1 | 1.5:1 | 1.5:1 |
| Rejection Rate | 99%* | 98%* | 99%* | 98%* |
| Auto Shut Off Valve | Yes | Yes | Yes | Yes |
| Manual Flush Flow Restrictor | Yes | Yes | Yes | Yes |
| Installation Adapters | Yes | Yes | Yes | Yes |
| Recommended Min Water Pressure** | 50-80psi | 50-80psi | 65-80psi | 65-80psi |
| Plumbing Size | 1/4in RO Tubing | 1/4in RO Tubing | 1/4in RO Tubing | 1/4in RO Tubing |
Low pressure may cause the RODI system to produce excessive wastewater. Water pressure can be increased by adding a booster pump before your RO/DI system.
Reverse Osmosis Membrane Specifications
| RO MEMBRANE | ^Dow Filmtec 75gpd (BW60-1812-75) |
^^Dow Filmtec 100gpd (TW30-1812-100HP) |
| For IceCap Models | 75gpd, 150gpd | 100gpd, 200gpd |
| Typical Rejection Rate | 96%-99%* | 96%-98%* |
| Source Water Pressure | 50psi | 65psi |
| Source Water Temperature | 77°F | 77°F |
| Source Water TDS | 250ppm soften tap water | 250ppm soften tap water |
| Recovery | 15% | 15% |
| Minimum Salt Rejection | 96% | 96% |
*Membranes have a typical stabilized salt rejection rate that can be reproduced through the conditions stated above.
Please refer to the link below for instructions on installing and using the IceCap RODI water filtration systems.
Pertains to IceCap 4 Stage RO/DI Model: IC-RI75, IC-RI100, IC-RI150, IC-RI200
WARRANTY
CoralVue, Inc. and IceCap hereby guarantee this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
Reviews
There are no reviews yet.