HYDROS Maven Auto Water Tester – HDRS-MVN – COMING SOON!
$1,199.99
The HYDROS Maven is a sophisticated aquarium controller designed for saltwater aquariums that can automatically test water parameters. It can automatically test Alkalinity (dKH), Nitrate (NO3), Phosphate (PO4), Calcium (Ca), and Magnesium (Mg).
Out of stock
Want to be notified when this product is back in stock?
The HYDROS Maven is a sophisticated aquarium controller designed for saltwater aquariums that can automatically test water parameters. It can automatically test Alkalinity (dKH), Nitrate (NO3), Phosphate (PO4), Calcium (Ca), and Magnesium (Mg).
Level Up Your Aquarium Game with HYDROS Water Testing
The HYDROS Maven is an advanced aquarium controller designed for saltwater aquariums that automatically tests the water parameters. This stand-alone device frees aquarists from the need to perform regular water testing, and performs the task with greater accuracy. It does not require another controller to function. With constant testing, the Maven greatly increases aquarium stability, and can be used to manage dynamic dosing schedules and other parameters with the HYDROS System. The HYDROS Maven can automatically test Alkalinity (dKH), Nitrate (NO3), Phosphate (PO4), Calcium (Ca), and Magnesium (Mg).
HYDROS Maven can perform the following tests:
- Alkalinity (dKH) – Reagent-based, NEMI method
- Nitrate (NO3)
- Phosphate (PO4)
- Calcium (Ca)
- Magnesium (Mg)
All HYDROS controllers are meticulously engineered, assembled, and supported in the USA.
HYDROS Maven Features:
- External testing chamber for easy maintenance
- Waterproof separation between the cuvette and the electronics
- Color-coded reagent lines
- Easy to install
- Fully stand-alone; no other equipment is necessary for testing
- Complete HYDROS integration for enhanced redundancy
- Made in the USA
HYDROS Maven Includes:
- Maven Controller
- Power Supply
- Sample Reagents
HYDROS Maven Specifics:
Dimensions (LxWxH): 9.5 x 4.25 x 11in
What you can expect from your HYDROS Smart Device
- Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app
- Ability to monitor and control your HYDROS device(s) locally through WiFi
- A fast dual-core 32-bit processor that allows control decisions to be made within each device
- The user sets the alerts and notifications
- Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device
- HYDROS Command Bus connections to transfer data and power to devices
Quick & Easy Setup
There is no complicated programming language to learn. If you can operate a smartphone, you can be the operator of a smart aquarium—tap, drag, press, or flick to adjust settings using intuitive icons and simple menus. Schedule each component in your aquarium life support system to run at a specific time, frequency, or intensity.You can also use real-time data and easily configure more complex actions.
12V Drive Port – 2 Available
The Drive Ports provide switched 12V DC power for running small HYDROS aquarium devices. The Control continuously monitors the exact current supplied by each port, so you will be immediately notified if a motor or pump quits drawing current or draws too much.
Each drive port can handle up to 1.5A, and the entire device can handle up to 3A in total.
Drive Ports Currently Support:
- Auto Top-Off (ATO) pumps
- Dosing pumps
- Cooling fans
- Cabinet LED lights
- Solenoids – 1/4in water and CO2 control
- Steering valves and relays
- Diaphragm pumps
Stirrers - HYDROS IV
Sense Port – 2 Available
The Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors.
Sense Ports Currently Support:
- Temperature sensor – Either air or water
- Fluid level – Optical sensors to measure liquid levels
- Leak detection – Monitoring for both point and wide area leak detection
- Flow rate – Measures the amount of fluid flowing through a pipe
- Total dissolved solids – Dual measurement of the TDS levels from your RODI system
Command Bus – 2 Available
The Command bus communicates with other HYDROS devices for the ultimate redundant failsafe to any HYDROS system.
Control up to 8 WiFi Devices
The HYDROS App allows you to create rules and set schedules to control our 4-Outlet WiFi AC Power Strips and Smart Outlets. Quickly turn on or off different pieces of aquarium equipment like pumps, powerheads, lights, algae scrubbers, UV sterilizers, protein skimmers, and more.
WARRANTY
CoralVue, Inc. and HYDROS hereby guarantee this product to be free from defects in material and workmanship for a period of:
- 1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
- Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
| Weight | 58 oz |
|---|---|
| Dimensions | 14 × 9 × 5 in |
Related products
Hydros Controllers
