BRS 4 Stage Systems are perfect for reefers who have water treated with chlorine or relatively clean well water. The 4 stage systems are self-contained on a single bracket making them ideal for tight spaces or where a non-permanent connection may be required. Installing a RO/DI system only takes a few minutes and can be done very easily without any permanent modifications to your home or the plumbing.
4 Stage Plus Water Saver RO/DI Features: Produce 150 GPD of product water without any more wastewater than a 75 GPD membrane would produce.
- Dual TDS Meter
- Glycerin Filled Pressure Gauge
- Pre-installed Automatic shut-off valve
- Pre-installed Flush Kit
- Multiple source water connections
- Drain/wastewater connections
- Mur-lok Push Connect dual EPDM O-Ring fittings
- 10 Ft Each of 1/4″ Blue, Red and Black Tubing
- Pre-Installed NSF Certified Filters
All Bulk Reef Supply RO/DI Systems are covered by our Limited Lifetime Warranty.
Bulk Reef Supply RO/DI systems only use the latest filters and components in Reverse Osmosis technology. We have designed our RO/DI units especially for reef tanks, but they can produce perfect water for other types of saltwater and freshwater aquariums too. If you have a well, or you are connected to city water we provide a variety of RO/DI systems that will fit your aquarium’s needs.
4 Stage RO/DI Systems – Perfect for city water that is treated with low amounts of chlorine, or well water with very minimal contaminants.
5 Stage RO/DI Systems – Our most popular system handles most types of well water along with most types of city water treated with chlorine including small amounts of chloramines.
6 Stage RO/DI Systems – If you are not sure what is in your water, or it contains excessive amounts of TDS or hard to remove contaminants like chloramines, phosphates, nitrates, silicates, etc. The BRS 6 Stage systems are designed to treat any water your home may have effectively. The Dual DI stage helps with the hard-to-remove ions like ammonia, phosphates, silicates, etc.
4 STAGES OF FILTRATION
Stage 1
Purtrex 5 Micron Depth Sediment Filter
Sediment filters trap debris and other free-floating particles that would normally clog expensive carbon blocks and foul membranes. Purtrex filters are actual depth filters with a graded density that progressively gets tighter through as water passes through the filter allowing them to last longer than the competitors.
Stage 2
BRS 5 Micron VOC Block (Chlorine 15,000 @ 1 GPM)
Our VOC carbon blocks are specially formulated to remove and reduce chlorine and volatile organic compounds from household water.
Stage 3
Dual 75 GPD Dow Filmtec Membranes (up to 99% rejection rate*)
DOW is hands down the industry leader for residential RO membranes. The 75 GPD Filmtec membrane can remove up to 99% of contaminants from traditional household drinking water. All membranes do require pressure to operate correctly, and DOW’s membrane only requires 50 PSI of feed pressure to operate efficiently.
For more info on DOW membranes – Click Here
Stage 4
Nuclear Grade Color Changing Deionization Resin
Deionization resin is the final stage of the RODI system and can polish your water down to 0 TDS. The DI resin is a mixed bed with a color-changing indicator to let you know when it is becoming depleted. The resin starts as a dark blue color that will turn gold when as it becomes exhausted and is a good indicator to let you know when to start looking at your TDS meter.
For more info on Color Changing DI Resin – Click Here
Need Replacement Filters? Click Here
BRS RO/DI 4 STAGE SYSTEM COMPARISON |
||||||||
BRS 4 Value RO/DI Systems | BRS 4 Value Plus RO/DI Systems | |||||||
---|---|---|---|---|---|---|---|---|
Gallons Per Day |
75, 100, 150, or 200
|
75, 100, 150, or 200
|
||||||
Sediment Filter |
Purtrex 5 Micron Depth Sediment Filter
|
Purtrex 5 Micron Depth Sediment Filter
|
||||||
Carbon Block |
BRS VOC 5 Micron Carbon Block
|
BRS VOC 5 Micron Carbon Block
|
||||||
Membrane |
75 or 100 GPD Dow Filmtec Membrane
|
75 or 100 GPD Dow Filmtec Membrane | ||||||
Deionization |
Single Mixed Bed DI Stage with Refillable Cartridge | Single Mixed Bed DI Stage with Refillable Cartridge | ||||||
Auto Shut Off Valve |
✓
|
✓
|
||||||
Canister Wrench |
✓
|
✓
|
||||||
Laundry Tub Connection Adapter |
✓
|
✓
|
||||||
Chrome Faucet Diverter Valve |
✓
|
✓
|
||||||
Glycerin Filled Pressure Gauge | ✓ | |||||||
Flush Kit |
✓
|
|||||||
Dual Inline TDS Meter |
✓
|
|||||||
Dimensions | 16″ x 6.25″ x 15.5″ | 16″ x 7″ x 15.5″ |
4 Stage Plus Water Saver RO/DI System Recommended Conditions:
- Minimum Water Pressure – 65 PSI
- Max Water Pressure – 90 PSI
- Recommended Water Temperature – 77°F
- Recommended Max TDS – <200ppm
Water pressure can be increased by adding a booster pump before your RO/DI system if a pressure increase is required. Low pressure will cause slow production of product water, with excess production of waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.
*DOW Filmtec 75 GPD Membranes have a 96% – 99% typical stabilized salt rejection rate that can be reproduced through the following conditions;
- Source Water Pressure – 50 PSI / Membrane
- Source Water Temperature – 77°F
- Source Water TDS – 250ppm Softened Tap Water
- Recovery – 15%
- Minimum Salt Rejection – 96%